Roar Core

Recover faster. Feel sharper. Roar Core drops and maintains your plunge water between 3–26 °C, with dependable cooling power and simple, plug-and-go setup.

Key benefits

• Serious cooling power: 1,160 W cooling capacity; chills 300 L to 10 °C in ~8 hours
• Wide temp range: set anywhere from 3–26 °C for beginners to pros
• Steady, consistent sessions: 900 L/h circulation to prevent hot spots
• Compact footprint: only 35 × 30 × 35 cm, 19.5 kg
• Simple power: 220–240 V AC (50 Hz), 3-pin plug
• R134A refrigerant with efficient, reliable 281 W compressor (1/2 HP system)

---

Who it’s for

Home plunge owners, coaches, gyms, studios, and recovery clinics who want true cold without daily ice runs—especially for small to mid-size tubs. Expect reliable pull-down and rock-solid temperature holding for consistent protocols.

---

What’s included

• 1× Roar Core Chiller
• 1× Filter System
• 1× Hose Set with Insulation
• 1× Water Pump
• 1× Roar Plunge™ Bathtub
• 1× Insulated Lid
• 1× Lid Cover
• 1× Inflatable Pillow
• 1× Storage Bag
• 1× Hand Pump
• 2× Vinyl Repair Patch

---

Specs (at a glance)

Category	Detail
Cooling Capacity	1,160 W
Operating Power	1/2 HP
Input Power	580 W
Compressor Power	281 W
Water Temp Range	3–26 °C
Cooling Time	~8 h to 10 °C (from ambient) in 300 L
Flow Rate	900 L/h (15 L/min)
Power Supply	220–240 V AC, 50 Hz
Plug	3-pin
Refrigerant	R134A
Dimensions (L × W × H)	35 × 30 × 35 cm
Weight	19.5 kg

---

Performance

Fast pull-down: A typical 300 L tub from room temperature to 10 °C in ~8 hours.
Stable temps for repeatability: 900 L/h recirculation helps maintain uniform water temperature across the tub.
Programmable range: 3–26 °C supports gradual adaptation and advanced protocols.

---

Installation & Placement

1. Position Roar Core on a flat, ventilated surface.
2. Connect inlet/outlet hoses (hand-tighten; no tools needed).
3. Fill your tub to the recommended level and prime the lines.
4. Power on (220–240 V AC, 50 Hz, 3-pin).
5. Set your target temperature and let the system pull down.

Drainage: Ensure water can be routed to a floor drain or outdoor area when you empty the tub.
Floor load note: A 300 L tub weighs ~300 kg when filled (plus tub & person).

---

Maintenance

• Filter care: Inspect weekly; clean/replace per use conditions (every 2–4 weeks).
• Water management: Skim debris; change water based on use and sanitation method.
• Sanitation compatibility: Works with common cold-plunge sanitation routines.
• Seasonal check: Inspect hoses, fittings, and electrical annually.

---

Safety & Compliance

• Electrical: Use a properly grounded outlet; GFCI/RCD protection strongly recommended. Do not use extension leads.
• Use guidelines: Start with shorter exposures; do not plunge alone.
• Health notice: Cold exposure may not be appropriate for everyone (cardiovascular conditions, pregnancy, etc.). Consult a healthcare professional.
• Refrigerant: R134A (service by qualified technicians only).

---

Shipping & Delivery

• Lead time: 3–5 working days.
• Method: Freight delivery (curbside as standard); white-glove available in select areas.
• On arrival: Inspect packaging; photograph any damage before signing and contact support.

---

Warranty & Returns

• Warranty: 2-year chiller, 1-year hoses/fittings
• What’s covered: Defects in materials/workmanship under normal use.
• Returns: 30-day return window; restocking fee may apply; return freight by customer unless DOA.
  Full terms: Return Policy

---

FAQs

1. Will Roar Core work with my tub?
   Roar Core is a complete system (chiller + insulated tub) engineered to work together. If you need a different size or a chiller-only setup, check our other models or contact us for a recommendation.
2. How long to get really cold?
   From room temp, expect ~8 hours to reach 10 °C in a 300 L tub. Smaller volumes chill faster.
3. What power do I need?
   220–240 V AC, 50 Hz via a 3-pin outlet. Use a properly grounded, protected circuit. Avoid extension leads.
4. Is it outdoor-safe?
   Place under cover, on a level surface with ventilation.
5. What about maintenance?
   Rinse/replace filters regularly, skim debris, and change water per your sanitation routine.
6. Which chemicals are compatible?
   Use cold-plunge-safe products only. Avoid anything that may damage seals/hoses.
7. Does it heat as well?
   Roar Core is a cooling system (3–26 °C).

---

Got questions? Check our FAQ or ping us on WhatsApp—we reply within minutes.